Every module has at least one Parent Object (Green Sphere) that ties the objects in the module together.The purpose of the modules is to make constructing spaceships faster and easier than using single parts. If there are two separate frames, the bigger one will be used as there can be only one frame.Ship frame must be consistent, there can't be two different frames that are not connected to each other.The thruster has to be properly positioned (forming a data connection with the base) and connected to the same frame as the base.The hardpoint is connected to beams with at least two bolts, and an actual thruster is in contact with the hardpoint.A valid ship frame consists of beams connected to each other with welds, and a valid thruster base (Device hardpoint) is connected to the beams directly.Foundation of the durability rules is the frame of beams which forms the ship’s hull, and to which everything else is attached to.All spaceships need to be built according to the durability rules in order to be able to fly without breaking.In Spaceship resources you will find information about different resources that spaceships will use.Įach spaceship requires the following things to fly:.Spaceship Designer: Pre-made blueprints/Tutorials/Tutorial Starter Spaceship.You should have basic knowledge of the Spaceship Designer before attempting spaceship assembly.You should have basic knowledge of device configurations and YOLOL in Starbase, as this guide includes machinery and devices.It will introduce the basics of spaceship hull structure, and basic devices and machinery needed for a working spaceship. This guide is an introduction to spaceship building in Starbase. 10 Ship Controls And Basic Configuration.